4 Input / 4 Output and 8 Input / 8 Output Cards for Passan

FDI Passan controller with a stackable I/O card can control inputs and outputs under the management of Passansoft.

There are three different I/O modules to be used with FDI Passan:
1104/544 is controls 4 inputs and 4 outputs; the module 1104/580 controls 8 inputs and the module
1104/508 controls 8 outputs.
Therefore, Passan can adapt perfectly to any sites requirements.

The inputs can manage door contacts, detectors with volt free outputs, video monitoring contacts (CCTV), alarm.

The I/O board can provide output relays to follow certain rules set in the software.
When an event occurs that matches a rule, a specific action is performed.

In Passansoft, you can choose up to 55 events that will cause this rule to be run:
e.g. when a door is forced to open, an SMS will be sent to the concierge's mobile phone or when an user is granted access, the light will turn on. A output relay can be activated if one or more conditions are fulfilled.
There are 16 conditions max per output.

The Input / Output boards allow you to take control of various system such as fire alarm and CCTV to increase security in the building.

Input/Output cards general features
• Powered by the controller, no additional PSU required
• Operation temperature: -20^oC to +50^oC
• CE compliance
• Plastic housing with external terminals

Output extension card characteristics
• An output relay can be activated if all the conditions are fulfilled or if at least one condition is fulfilled
• 16 conditions can be selected per output
• Three output operation modes
• Output activation time can be set

Input extension card characteristics
• Input stand-by status: NO or NC
• Input activation time can be set

Downloadable PDF of I/O Interface Module spec sheet